Switch Mode Power Supplies, Linear Power Supplies & Mains Transformers

Site Last Updated: Thursday, March 6, 2008

6 Watt Miniature Open Frame Switch Mode Power Supplies

Dimensions: 55 x 27.8 x 17.8mm (L x W x H)

Part number Output
UOP305-3315 .3.3V 1.5A
UOP305-3320 3.3V 2.0A
UOP305-4207 4.2V 0.7A
UOP305-0505 5.0V 0.5A
UOP305-5605 5.6V 0.5A
UOP305-0510 5.0V 1.0A
UOP305-0605 6.0V 0.5A
UOP305-0610 6.0V 1.0A
UOP305-7508 7.5V 0.8A
UOP305-8505 8.5 V 0.5A
UOP305-0905 9.0V 0.5A
UOP305-9602 9.6V 0.2A
UOP305-1205 12 V 0.5A
UOP305-1504 15 V 0.4A
UOP305-1803 18 V 0.3A
UOP305-2402 24 V 0.2A
GENERAL SPECIFICATIONS:
Operating Temperature: 0 ~ 40
Operating Relative Humidity: 5 ~ 95%RH
Storage Temperature: -20 ~ 85
Withstanding Voltage: AC3000V/Min (between Input & Output)
,10mA(Max.)
Insulation Resistance: DC500V 100M(Min.)
(between Input & Output)
Efficiency: 70% Min

INPUT/OUTPUT SPECIFICATIONS:
Input Voltage: AC100V-240V,50/60Hz
Range Voltage: AC 90V-264V,47/63Hz
Output Power: 6W
Output Voltage: 3.3V-24V
Over Current Protection: 120% Min
Over Voltage Protection: 120% Min
Short Protection: Auto Recovery
Load Regulation: ±5%

6 Watt Miniature Open Frame Switch Mode Power Supplies

Click here to enlarge technical diagram

The PowerPax range of 6 watt ultra miniature open frame power supplies offer single regulated outputs of between 3.3vdc and 24vdc and measure just 55 x 27.8 x 17.8mm. They are manufactured to CE standards and are designed to meet EMC directives. This range meets all CE and EMC requirements and has been certified by an independent laboratory.

Please note that these open frame power supplies are considered as a component which will be installed into another piece of equipment. Since this affects EMC performance PowerPax cannot guarantee that the final equipment will meet EMC directives, so it is recommended that product manufacturers re-test for EMC compliance once the PSU is housed into the equipment in question.

Copyright PowerPax UK © - Valid XHTML | Valid CSS