This range of Ni-Cd/Ni-MH battery chargers protects against over charging your battery using delta V control. Its recommended that a charger is selected with a charging current of 0.4C to 1C (C = battery pack capacity). When the battery is full the internal IC will detect the voltage change to prevent over charging. The unit also has a built in discharge function. An optional fuse or polyswitch can be added for reverse polarity protecion, short circuit protection or overload protection
| Model No | Output Power | Input Voltage | Output Voltage(s) | Output Current(s) | Battery Type |
| MN028V040UK | 1.12 W | 230vac 50Hz | 2.8v | 400mA | 2 cells 2.4V | MN042V040UK | 1.68 W | 230vac 50Hz | 4.2v | 400mA | 3 cells 3.6V | MN056V040UK | 2.24 W | 230vac 50Hz | 5.6v | 400mA | 4 cells 4.8V | MN070V040UK | 2.8 W | 230vac 50Hz | 7.0v | 400mA | 5 cells 6.0V | MN084V030UK | 2.52 W | 230vac 50Hz | 8.4v | 300mA | 6 cells 7.2V | MN098V030UK | 2.94 W | 230vac 50Hz | 9.8v | 300mA | 7 cells 8.4V | MN112V030UK | 3.36 W | 230vac 50Hz | 11.2v | 300mA | 8 cells 9.6V | MN126V030UK | 3.78 W | 230vac 50Hz | 12.6v | 300mA | 9 cells 10.8V | MN140V030UK | 4.2 W | 230vac 50Hz | 14v | 300mA | 10 cells 12V | MD028V060UK | 1.68 W | 230vac 50Hz | 2.8v | 600mA | 2 cells 2.4V | MD042V060UK | 2.52 W | 230vac 50Hz | 4.2v | 600mA | 3 cells 3.6V | MD056V060UK | 3.36 W | 230vac 50Hz | 5.6v | 600mA | 4 cells 4.8V | MD070V060UK | 4.2 W | 230vac 50Hz | 7.0v | 600mA | 5 cells 6.0V | MD084V060UK | 5.04 W | 230vac 50Hz | 8.4v | 600mA | 6 cells 7.2V | MD098V060UK | 5.88 W | 230vac 50Hz | 9.8v | 600mA | 7 cells 8.4V | MD112V060UK | 6.72 W | 230vac 50Hz | 11.2v | 600mA | 8 cells 9.6V | MD126V060UK | 7.56 W | 230vac 50Hz | 12.6v | 600mA | 9 cells 10.8V | MD140V060UK | 8.4 W | 230vac 50Hz | 14v | 600mA | 10 cells 12V | MV042V100UK | 4.2 W | 230vac 50Hz | 4.2v | 1000mA | 3 cells 3.6V | MV056V100UK | 5.6 W | 230vac 50Hz | 5.6v | 1000mA | 4 cells 4.8V |
